|
Colt Model 1902 Sporting/Military
|
|
Colt M1902 Military
|
Other Pictures:
Early Colt Model 1902 Sporting Model
On these early Sporting Models, the trigger, pins and screws were fire blued. The hard rubber grips were standard on these guns from the beginning of production. (Another carry-over from the Model 1900)
Manual(s)
(MANUAL) Colt 1902 sporting Manual (.pdf)
(MANUAL) Colt 1902 Military Manual (.pdf)
|
Colt Model 1902 Sporting Model - During this period of production, guns with odd numbered serial numbers were fitted with rounded hammers and guns with even numbered serial numbers were fitted with spur hammers. These guns lacked the slide lock and lanyard loop as seen on the 1902 Military Model.
Disassembly instructions:
WARNING : COLT MODEL 1902 SPORTING ONLY :
Always make sure pistol is unloaded!
1. Open up a large paper clip.
2. Cock hammer and remove magazine
3. Turn pistol upside down and pull back slide approximately 1/2" holding it in that position.
4. Insert unbent end of paper clip through hole in the lower front frame until it touches the slide lock.
5. Leave paper clip in that position and release slide to move forward. There should now be play in slide movement. (paper clip should remain in this position until pistol is reassembled.)
6. With the left side of the pistol facing down, the slide lock should drop out. Now the slide can be withdrawn from the rear. No force is required to remove the slide lock. The slide lock will only exit the pistol from the left side.
7. Assemble in reverse order remembering to line up the small pin on the slide lock with the corresponding cut in the slide. Make sure lock is securely in place before removing paper clip.
NOTE: Further disassembly of the Model 1900 requires the removal of pins and is not recommended.
Disassembly instructions:
WARNING : COLT MODEL 1902 MILITARY ONLY :
Always make sure pistol is unloaded!
1. Remove magazine
2. Depress spring loaded concave plug 1/8". Depressing the plug releases tension on the slide lock
3. With the left side of the pistol facing down, depress plug completely while pushing on right side of slide lock. The slide lock should drop out. Cock hammer and withdraw slide from the rear. No force is required to remove the slide lock. The slide lock will only exit the pistol from the left side.
4. Assemble in reverse order remembering to line up the small pin on the slide lock with the corresponding cut in the slide. Slide lock must be inserted from the left side while concave plug is fully depressed.
NOTE: Further disassembly of the Model 1902 Military requires the removal of pins and is not recommended.
MODEL 1902 SPORTING PRODUCTION
Year: 1902
Serial Number: 4275 - 4900
Total: 625
Year: 1903
Serial Number: 4901 - 6400
Total: 1500
Year: 1904
Serial Number: 6401 - 7700
Total: 1300
Year: 1905
Serial Number: 7701 - 8800
Total: 1100
Year: 1906
Serial Number: 8801 - 10100
Total: 1300
Year: 1907
Serial Number: 10101 - 10999 / 30000 - 30190
Total: 1090
|
Weapontype:
Pistol
Manufacturer:
Colt Defense LLC, P.O. Box 118, Hartford, CT, 06141 U.S.A. Tel: 1-800-241-2485, (860) 232-4489 Fax: (860) 244-1442
Cartridge:
.38 ACP
Weight:
1006 g (35.5 oz) "Sporting"; 1077 g (38 oz) "Military"
Length:
226 mm (8.9 in) "Sporting"; 228.6 (9 in) "Military"
Barrel:
152 mm (6 in) Both
Magazine Capacity:
7 Rounds "Sporting", 8 Rounds "Military"
In Production:
1902-12
|
